2019 GENERAC SD20

2019 20kW Diesel Generac Industrial Power Model with 54 gallon base tank in New condition. Stored indoors. Never been run.– 20 kW Rating, wired for 120/240 VAC single phase, 60 Hz
– Stationary Emergency-Standby rated
– Permanent Magnet Excitation
– Standard Weather Protective Enclosure, Steel
– Industrial Grey Baked-On Powder Coat Finish
– UL2200
– EPA Certified
– H-100 Control Panel
– Meets NFPA 99 and 110 requirements o Temp Range -40 to 70 degrees C
– Digital Microprocessor:
– Two 4-line x 20 displays, full system status
– 3 Phase sensing, +/-0.25% digital voltage regulation
– RS232, RS485 and Canbus remote ports
– Waterproof connections
– All engine sensors are 4-20ma for minimal interference
– Programmable I/O
– Built-in PLC for special applications
– Engine function monitoring and control:
– Full range standby operation; programmable auto crank, Emergency Stop, Auto-
Off-Manual switch
– Isochronous Governor, +/-0.25% frequency regulation
– Full system status on all AC output and engine function parameters
– Service reminders, trending, fault history (alarm log)
– I2T function for full generator protection
– Selectable low-speed exercise
– HTS transfer switch function monitoring and control
– 2-wire start controls for any 2-wire transfer switch
– Standard MLCB, 80% rated thermal-magnetic
– 100 Amp
– 8 Function Alarm Relay Panel
– Battery Charger, 10 Amp, NFPA 110 compliant, installed
– 110 AH, 925 CCA Group 31 Battery, with rack, installed
– Coolant Heater, 1500W, 120VAC
– 12″ 54 Gallon Double-Wall UL142 Basetank
– Mechanical fuel level indicator gauge
– Electronic fuel level sender
– Emergency Vent
– 8″ Fuel Fill Extension
– 3 Owner’s Manuals
– 120V GFI Receptacle and 240V Receptacle
– Engine Run Relay
– 2 Hour factory load testing at unity power factor